RepairMyMobile.in

One Stop Solution for Mobile Repair

Samsung SM-J810G Flash File (4 File Stock ROM)

Download Samsung SM-J810G Flash File:

samsung j810g flash file

 

How to Flash Samsung SM-J810G:

Make sure your device is atleast 30 percent charged to perform flashing.
• Switch off the mobile
• Press the Power + volume down + home button
• Android symbol will appear, now press volume up to enter into the download mode
• Now open the Odin flash tool and follow the steps as shown in the video
• Select Samsung SM-J810G.
• Select the Odin tool and open it
• Select BL file
• Click AP or PDA then select AP File
• Click CP and select Modem File.
• Click CSC and select CSC File.
• After selection mobile will get detected automatically
• Now click start on system & installation is in process
• After installation mobile switch ON of its own.

How to Enable Volte in Samsung Phone if Missing after Update or Flash

Most of the Samsung phone comes with Volte support. However, if you had updated the phone with the Normal System update or tried to flash the phone which results in Volte missing.

It can be repaired easily by phone only.

  • Dial *#272*Enter Imei no#.
  • It will prompt a message on screen Preconfig. Under it Select INS & Click on install.

samsung volte update

  • It will take some time for installation and Volte will be updated.

In case if the phone does not have the INS file then it has to be flashed. You have to download Samsung Flash file & unzip it.

Then you have to select Home CSC under CSC tab in odin tool and flash.

Samsung phone can be flashed in download mode and make sure to install Samsung kies.

Xiaomi Redmi 6 Flash File (Stock ROM)

Download Xiaomi Redmi 6 Flash File:

How to Flash Xiaomi Redmi 6:

Install MTK Driver.
1- Download the package & Extract SP Flash tool.
2- Out of the icon appearing, Double click on Flash_tool.exe
3- it will launch the tool on your PC, Click on Scatter-Loading appearing on the Right side of the tool.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Download to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down or Volume up key.
7- It will lead you to Successful Flashing

Xiaomi Redmi 6A Flash File (Stock ROM)

Download Xiaomi Redmi 6A Flash File:

How to Flash Xiaomi Redmi 6A:

Install MTK Driver.
1- Download the package & Extract SP Flash tool.
2- Out of the icon appearing, Double click on Flash_tool.exe
3- it will launch the tool on your PC, Click on Scatter-Loading appearing on the Right side of the tool.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Download to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down or Volume up key.
7- It will lead you to Successful Flashing

Mi 8 Flash File (Fastboot ROM)

Download Mi 8 Flash File:

mi 8 edl mode

How to Flash Mi 8:

Download Mi 8 Flash File
1- Connect phone through USB cable to PC and unplug battery.
2- Short Test Point and connect battery.
3- Under Device Manger, port of Qualcomm HS USB QLoader 9008 port will appear.
4- Download & run MI Flash Tool
5- Place the Flash File on Desktop.
6- Assign the Folder path.
7- Click on refresh & then tap Flash button.

Mi Note 2 Flash File (Fastboot ROM)

Download Mi Note 2 Flash File:

Redmi 4 test point

How to Flash Mi Note 2:

Download Mi Note 2 Flash File
1- Connect phone through USB cable to PC and unplug battery.
2- Short Test Point and connect battery.
3- Under Device Manger, port of Qualcomm HS USB QLoader 9008 port will appear.
4- Download & run MI Flash Tool
5- Place the Flash File on Desktop.
6- Assign the Folder path.
7- Click on refresh & then tap Flash button.