Search Results for: jio
Download LYF JIO LF2406s Flash File to install KAIOS OS on your phone.
Boot key: “None” Connect Phone in OFF mode
How to Flash LYF Jio LF2406:
***Make sure no space is there in File Path.
1- Download LYF LF2406 Flash file
2- Download QPST tool.
3- Install Qualcomm driver.
4- Run QPST tool.
5- Add new port. Connect phone holding boot key. (Check device manager)
6- Click browse & select Stock ROM file.
7- Select Download and wait for the flashing to finish.
If flashing Fails or does not start, then there must be a gap between the words while choosing flash file. Rename the folder.
As in Qualcomm Flashing, there must be no gap in between the words.
jio new should be replaced by jio_new or jionew.
Instruction For Long Lasting Performance:
- Reset or Format the phone after being battery replaced to get it sync with the Phone.
- Use Original Charger or Professional Charger.
- Charge it Full before the First Usage. (100 Percent)
- Usually takes 2 hours for Full Charge.
Things to Avoid:
- Avoid Charging for more than 24 hours.
- Do not modify the battery for any other usage.
- Avoid Battery getting wet.
- Do not Dispose in Fire.
- Do not Short Circuit.
- Do not Expose to High Temperature.
If you are looking to enable Diag. port in Jio Qualcomm Keypad phones by flashing the latest flash file.
Then this process no longer works.
Earlier by flashing, Diag. port get enabled.
Note: You can buy Jio Battery with 3 Month Warranty at Minimum price as compared to the Market or Online rate.
We will guide you throughout the process which must be used to enable Diag. port in the latest Qualcomm Keypad Phones.
We had used F220b as an example which is powered by a Qualcomm processor.
1- First, replace the Loader file of new File to the old File.
2- Loader File for Jio F220b is under folder Boot_images > Build > ms > bin > 8909 > emmc
3- Copy all files from EMMC of the Latest File to the Old File.
Then use, the Old file to flash Jio F220b.
All Jio Keypad File can be Found at RepairMyMobile.
Process of flashing will be the same. It will enable Diag. port in the phone.