One Stop Solution for Mobile Repair
Download Android MTK CDC Driver auto installer to install it with one click. Usually New Oppo MTK phone requires CDC driver.
How to Install Android MTK CDC Driver:
1- Download Driver.
2- Unzip it.
3- Setup is available for both 32-bit & 64-bit PC.
4- Just follow the instruction within tool. It is auto installer which does not required to install manually.
Download ADB Auto Installation Driver used to Flash any Moto, QGDP tool or any phone connected in Fastboot Mode.
How to Install ADB Driver:1- Download Driver.
2- Unzip it.
3- Setup is available for both 32-bit & 64-bit PC.
4- Just follow the instruction within tool. It is auto installer which does not required to install manually.
Download Qualcomm Auto Installation Driver used to Flash any Qualcomm Devices.
After Installation of Qualcomm driver, then only Mobile can be flashed using QPST tool.
1- Download Driver.
2- Unzip it.
3- Setup is available for both 32-bit & 64-bit PC.
4- Run Exe file.
Download SPD Auto Installation Driver used to Flash any Spreadtrum Devices.
After Installation of SPD driver, then only Mobile can be flashed using SPD Flash Tool.
1- Download Driver.
2- Unzip it.
3- Setup is available for both 32-bit & 64-bit PC.
4- Run DPinst.
Download MTK Auto Installation Driver used to Flash any Mediatek Devices.
After Installation of MTK driver, then only Mobile can be flashed using SP Flash Tool.
1- Download Driver.
2- Unzip it.
3- Setup is available for both 32-bit & 64-bit PC.
4- Run both DPinst & SPinstall.
MTK Mobile USB Driver Installation
MTK driver installation is required during flashing. It connect MTK cpu mobile with PC.
If you are using SP flash tool as flasher, then without installing MTK driver flashing will not start.
1- Download the Driver.
2- Switch off the Mobile & connect to PC.
3- Run the Driver.
4- Proceed to Installation process.
5- When installation is finished, “Found New Hardware” notification will prompt.
6- Click on it and Select Install from list (Advanced).
7- Now, choose 2nd option i.e. “I will choose driver to install”.
8- Click on Finish.
9- Open Device Manager or Manage.
10- In Ports (Com & Lpt), you will find the Mobile.
