Download LYF JIO F90m Flash File to install KAIOS OS on your phone.
- LYF-F90M-000-03-31-121219 (Password: Lyff90m00_Repairmymobile)
- QFlash Tool
- LYF-F90M-000-03-30-101019
Note: Steps to Enable Diag Port in Jio Phones
LYF JIO F90m QCN File Tested:
Password: RepairMyMobile.in_F90mqcn
Boot Key: Center Key
How to Flash LYF Jio F90m:
1- Download LYF F90m Flash file which consists of File, Tool & Driver.
2- Install Driver
3- Connect Phone in off mode holding Center Key to cross-check driver installation. It will make port named “Qualcomm HS-USB Diagnostics 9091”
4- It means the driver has been installed successfully.
5- Install Flash Tool named Megafone SW Download Tool.
6- Click on Search File & assign the path of the flash file.
7- Out of four File appearing, select prog_emmc_firehose_8909_lite (2nd File)
8- Connect Phone & press Center Key as Boot key & Click on Download.
9- Phone will switch to EDL mode directly and Upgrade starts.
***Make sure no space is there in File Path.
Flashing using Flash tool:
If flashing Fails or does not start, then there must be a gap between the words while choosing flash file. Rename the folder.
As in Qualcomm Flashing, there must be no gap in between the words.
jio new should be replaced by jio_new or jionew.
